How to Install Natural Stone Veneer

Natural stone veneer can be applied to retaining walls, indoor or outdoor fireplaces, wall facades, and pillars. Thin stone veneers are made from real stone so they resist warping, cracking, fading, and chipping. Additionally, if they do become chipped or cracked nobody will notice since, unlike fabricated fake stone veneers, the color and texture of the stone goes all the way through the stone. Stone veneer is also faster and easier to apply since it is lighter and easier to handle.

Natural thin stone veneers come in a wide variety of styles and colors to choose from. They are quarried in Arizona, Lannon, Fond Du Lac, Chilton, and Michigan. Thin stone veneer is the ideal stone application since it is superior in terms of being very durable and flexible in matching nearly every style, color, and design. Stone veneers are thinner and lighter than manufactured fake stone veneer and fiberglass stones.

The Basics

Stone veneer installation on any surface needs the same basic methods of application. First there needs to be a moisture barrier, a frame or structure for the mortar to grip, mortar, and then the stone of your choice. The moisture barrier and backbone frame are necessary components to ensure that your thin stone veneer will last a lifetime.

When installing stone Veneer to plywood, paneling, wall sheeting, wall board, or other non stone surface:

1. Cover the wall with a moisture barrier that is weather resistant and protects the underlying wood and the back of the stone veneer from moisture damage.

2. Apply a metal lath, mesh, or sheeting with galvanized nails or staples according to your local building code. This supplies rigid support for the mortar to stick to which provides a firm backbone for your stones to grip.

3. Apply your mortar, and on top of that apply your choice of stone veneer with mortar in between the “joints.”

4. After your mortar has hardened, simply use a stiff brush and some water to scrape away any mortar that has found its way onto the face of your stones.

Concrete Masonry Stucco

1. As long as the masonry contains no oils, surfactants, or other chemicals on its surface and is clean and dry then you can feel free to apply the stone veneers without any prep. Just make sure that the backside of the masonry will not be exposed to a water source such has those used for retaining walls, ponds, or garden beds.

2. If it does contain chemicals or oils simply etch the surface with muriatic acid and score with a stiff wire brush.

3. Apply your mortar and your stone as usual.

4. If your surface has been treated with paint or other chemicals, simply sand blast this surface away or follow directions above and apply a barrier material, metal lath, mesh, or sheeting and install stone as you would for a plywood wall.

Metal Buildings

1. Install paperbacked 3/8 inch expanded metal lath to metal cladding supports. Use metal cladding supports of at least 12 to 20 gage and using 1 ¼ inches -12 pancake head super tight screws. Make sure that the screws penetrate at least 3.8 inch beyond the inside of the metal surface and at least every 12 inches.

2. Apply a 1/2 inch to a 3/4 scratch coat of mortar and allow it to dry at least 48 hours.

3. Apply the mortar and install the stones.

4. After the mortar had been allowed to dry at least 24 hours simply clean any mortar stains form the face of the stones with a stiff brush and water.

Natural Thin Stone veneers

Natural stone veneers are durable and long lasting. In the long run, real stone is more economical since it requires nearly zero maintenance, should never need to be replaced under normal conditions, and resists cracking, fading, chipping, erosion, and weather conditions.

Thin stone is available in a wide variety of colors and styles because it is made from natural stone. Therefore you can choose from more colors and cuts than fabricated stone.

Halquist Stone, Wisconsin’s premier supplier of thin stone veneer, offers thin stone veneer that is cut from quarries in Arizona, Wisconsin, and Michigan.

 



Leave a Reply